info@tureengineering.com852 53090835

AUTOJETDP-255A/370A Series Automatic Self-priming Deep Well Pumps

Descriptions

  • The AUTOJETDP series pumps are regarded as one of the best surface pumps or deep well water priming.
  • It consists of two pumps connected in series, one is ejector pump and the other is centrifugal pump.
  • The ejector pump is lowered in a 3 well and connected to the centrifugal pump body by two pipes.
  • For working principle, please refer to the pipe connection below.
  • Usually, these pumps are used with a set of TANK-AUTO system include the tank, the pressure gauge, the pressure switch,the foot valve, etc.
  • The TANK-AUTO system is another most significant merit of this pump,which make the pumps more convenient for using.
  • These pumps are suitable for clean water and chemical non-aggressive fluid.
  • They are extremely reliable, economical to use in domestic applications.
  • To ensure adequate counter-pressure, it is always better to install a foot valve with a filter on the suction end.
  • These pumps should be installed in a covered area, protected against the weather.

PUMP

  • Pump body: Cast iron
  • Impeller: Brass/Techno-polymer
  • Mechanical seal: Carbon/Ceramic/Stainless steel

 

MOTOR

  • Internal thermal protector
  • Single Phase
  • Heavy Duty Continuous Work
  • Motor Housing: Aluminum
  • Shaft: Carbon Steel/Stainless Steel
  • Insulation: Class B/Class F
  • Protection: IP44/IP45
  • Cooling: External Ventilation

Contact Us

Ture Engineering was established in 1993. The company specialized in pumping solutions across wide range of area: Residential, Commercial, Industrial, Agriculture, Municipal, and Firefighting. Ture has always been the preferred pump suppliers in the market. We strive to provide professional advice, quality products and attended services to achieve the best solution for the our customers’ pumping needs.

13F/C On Luen Building 7-9 Kimberley street, Kowloon, Hong Kong

info@tureengineering.com

852 37075874

Send us a message

Dear customer, please leave us your contact details and we will contact you to give you a satisfactory solution.



Want to discuss a project?

If you have any inquiries about our pumps or motor, please do not hesitate to contact us.

Contact us

info@tureengineering.com