info@tureengineering.com852 53090835

DB/TPS/DBZ Series Peripheral Pumps

Descriptions

  • Volumetric water pumps to offer high pressions in relation to comparatively low powers and which have particularly steady operating curves.
  • They are qualified in domestic fittings, to increase the system pressure in aqueducts and for automatic water distribution by small autoclave tanks or by hydrosphere units.
  • For the correct fuctioning of the pump, use clean water, or non-aggressive liquids only, without sand or other solid impurities.

DESIGN FEATURES

  • Pump body / motor support: cast iron
  • Impeller: Brass
  • Motor shaft: AISI 1045
  • Mechanical seal: NBR / Graphite / Ceramic

SPECIAL FEATURES ON REQUEST

  • Stainless steel welding shaft
  • AISI420 / AISI304 / AISI316 stainless steel shaft
  • FRM / EPDM / SIC / WC mechanical seal
  • Other voltage and frequency
  • Internal thermal protector
  • Three phase power

PRODUCTION STANDARD

  • IEC 60034-1
  • IEC 334-1
  • IEC 34-1
  • ISO 2548

MOTOR

  • Single phase power supply with capacitor permanently activated
  • Insulation class: B
  • Protection: IP44
  • Speed of rotation: 2850 rpm
  • Continuous duty: S1

OPERATING LIMITS

  • Suction lift up to 6-8m with foot valve
  • Maximum operating pressure: 8 bar
  • Maximum ambient temperature: +40℃
  • Liquid temperature up to +90℃
  • Maximum altitude +1000m

Type Power μF Ampere
I max.
Q L/min
m3/h
0 5 10 20 30 35 40 45 DNA DNM N.W
(kg)
Package Dimension
L×W×H(mm)
HP kW 0 0.3 0.6 1.2 1.8 2.1 2.4 2.7
DB220 0.3 0.22 8 1.9 H
(m)
24 17 9.5 5 1″ 1″ 11 240 170 235
DB370 0.5 0.37 12 2.5 36 34 28 22 19 16 1″ 1″ 13 265 210 280
DBZ130 0.3 0.22 8 1.5 22 17 9.5 5 1″ 1″ 13 280 230 285
TPS60A 0.24 0.18 8 1.7 32 28.5 25 17 8.5 4.5 1″ 1″ 7.2 255 175 218
TPS60 0.3 0.22 8 1.9 35 31 27 19 10 6 3 1″ 1″ 10.5 255 175 218
TPS65 0.75 0.55 16 3.7 65 58 52 38 24.5 18 11.5 5 1″ 1″ 10.8 295 195 235
TPS70 1 0.75 20 4.5 70 63 56 41.5 27.5 20 13 6 1″ 1″ 12 295 195 235
TPS80 1.5 1.1 25 7 80 68 64.5 50 34.5 27 19.5 12 1″ 1″ 13 300 195 235

Contact Us

Ture Engineering was established in 1993. The company specialized in pumping solutions across wide range of area: Residential, Commercial, Industrial, Agriculture, Municipal, and Firefighting. Ture has always been the preferred pump suppliers in the market. We strive to provide professional advice, quality products and attended services to achieve the best solution for the our customers’ pumping needs.

13F/C On Luen Building 7-9 Kimberley street, Kowloon, Hong Kong

info@tureengineering.com

852 37075874

Send us a message

Dear customer, please leave us your contact details and we will contact you to give you a satisfactory solution.



Want to discuss a project?

If you have any inquiries about our pumps or motor, please do not hesitate to contact us.

Contact us

info@tureengineering.com